Polyjacking Foam Injection in Visalia

Polyjacking is the modern way to level a sinking concrete slab. Small holes — about the size of a coin — are drilled through the concrete, and a two-part polyurethane foam is injected underneath. The foam expands, fills the voids, and lifts the slab back to level. Within minutes it hardens into a dense, waterproof support that holds the slab up permanently.

For Visalia homeowners, the appeal is practical: no demolition, no concrete truck, no week of waiting. Most residential jobs are done in a few hours, and the driveway or patio can be used again almost immediately.

How polyjacking works, step by step

First, the contractor surveys the slab, measures how far each section has dropped, and probes for voids underneath. Then small injection holes are drilled in a pattern across the sunken area. The foam is injected in controlled bursts — a little at a time, with the slab's elevation checked constantly — so the concrete is lifted evenly and does not crack from being raised too fast on one side.

Once the slab is level, the holes are patched with a colour-matched mortar, the site is cleaned, and the foam is left to cure — which takes minutes, not days. The result is a slab that is level, supported along its whole underside, and sealed against water washing the soil out again.

• •Survey and void probing — the slab is measured before any foam is used
• •Small injection holes, drilled in a pattern across the sunken area
• •Controlled foam injection, with elevations checked throughout
• •Holes patched, site cleaned, slab usable within minutes

What polyjacking can and cannot lift

Polyjacking works on driveways, sidewalks, patios, garage floors, pool decks, and warehouse slabs — any concrete that is mostly intact but has sunk. It is the right fix when the slab itself is sound and the problem is the soil underneath.

It cannot fix a slab that is broken into pieces, badly spalled, or structurally failed — lifting a shattered slab just gives you a level pile of rubble. It also cannot fix a foundation problem: if the house itself is settling, the house needs piers, not foam. A contractor who offers polyjacking for a settling house is selling the wrong fix.

• •Driveways, walkways, patios, and garage floors
• •Pool decks and commercial slabs
• •Not for slabs broken beyond repair
• •Not a substitute for foundation underpinning

Polyjacking vs mudjacking in Central Valley soil

The difference matters most in Visalia because the soil is already the problem. Mudjacking pumps a heavy cement-and-soil slurry under the slab — tonnes of extra weight on ground that is already failing. Polyjacking foam weighs almost nothing by comparison, so it lifts the slab without loading the soil further. The foam is also waterproof, so it will not wash out the way a slurry can, and it cures in minutes rather than days.

Part of: Slab Leveling — Polyjacking — see the main service page for the full overview.

Related services

Frequently asked questions